Copy of Frequently Asked Questions
It is best to use the lowest speed setting while using the Fusion Cultivator. Generally this is speed setting "1" or "Lo" on most drills
Every drill is different. To set the ideal clutch torque setting, start by operating the cultivator tines in the soil with the drill clutch torque set to its lowest setting “1”. Then incrementally increase the clutch torque level step-by-step, testing the engagement of the cultivator with the soil each time until the cultivator tines are able to turn the soil without slipping the drill’s clutch or causing the drill to stop too easily in the soil that is being cultivated. NEVER operate the cultivator while the cordless drill is set to "drill" mode (the highest clutch setting). Doing so may cause damage to your drill or the cultivator.
Never operate the Fusion cultivator while the drill is in "hammer drill" mode. Doing so will likely cause damage to your drill or the cultivator.
The Fusion Cultivator is designed to fit nearly all mainstream cordless drills that fit the requirements below. The adjustable torque arms and durable strap allow for adjustment.
Ensure the cordless drill meets these minimum requirements.
• 300 in-lb max. torque
• 3/8 inch drill chuck
• Brushless motor design
• 18 Volt or higher
• Lithium Ion Battery (3.0 Ah or higher)
The Fusion cultivator is designed for raised bed gardens and existing garden plots. It is not designed to create new gardens. If attempting to break new ground, results may vary. For this task we recommend larger gas tillers from Earthquake Power Equipment.
Ardisam, Inc., warrants this Fusion™ Drill-Powered Cultivator under a one-year limited warranty to be free from defects in materials or workmanship or both for a period not exceeding twelve consecutive months from the date of original purchase by the first retail consumer or commercial end user. “Consumer use” means personal recreational use by a retail consumer. “Commercial use” or “commercial application” means all other uses, including use for commercial, income producing or rental purposes. Once a product has experienced commercial use, it shall thereafter be considered as a commercial product for purposes of this warranty. This warranty applies to the original owner that provides a proof of purchase. The warranty is not transferable. The warranty period begins on the date of purchase by the first retail consumer or commercial end user, and continues for the twelve month consecutive period thereafter. Any unit used in a commercial application is covered for a period of 90 days after purchase. For the warranty to be valid, the product must be registered online at www.fusiondrillpowered.com within 30 days of purchase. Ardisam, Inc. shall not be obligated to ship any repair or replacement product to any location outside of the United States of America or Canada. For more details, please see your owners manual.
The torque arms are not used when the Fusion Cultivator is shorted to 19" so it is important that your free hand be placed on the handle for control.
All orders placed on fusiondrillpowered.com ship for free to the lower 48 states. For international orders, please contact customer service.
You can expect to receive your order within 4-7 business days after the order is placed.